Centrifugal Pumps

The SUPPLY & RENTAL PUMP 

High Volume Pumping Application

Ideal products for high capacity oil and water production 

Applications

• Oil or Water Production
• Water Injection System
• Booster ESP
• Bottom Discharge ESP
• Inter-Zone Injection System

Key Features

• Multistage Compression type Pumps

• Bowl-Type Stages

• Wide Range of Flow Rates ( 14,000 - 95,000 BPD )

• Wide Range of Pressures ( 1000 – 6000 PSI )

• Oil-Filled ESP Motors

• High Horsepower Motors (up to 1200 HP)

• Designed to Prevent Stress Corrosion, Cracking or Scaling:
  - Ni-Re
  - SST

  - NAB
  - Super Duplex Stages Materials

• Special Factory Production Quality Control and Extended Testing Procedure

  
  
  
  

  APC® Three Phase Electric Motor

  Typically, the three phase, two pole induction motor connects to the bottom of the seal section. The ESP motor may be a single motor or may be made up of two or more motors bolted together in tandem, depending on the total horsepower (HP) required to obtain the necessary lift. All ESP motors are filled with refined mineral based oil or synthetic oil that withstands high temperatures, while providing dielectric strength and lubrication for the bearings through thermal conductivity.

  Motors are hand-wound by skilled APC technicians with the latest industry techniques. Primary insulation in APC’s standard motors is provided by Kapton insulated magnet wire which is suitable for temperatures up to 325o F/162o C. Proprietary insulation materials are also used for applications where higher operating temperature ratings are required. Resistance to exterior corrosion is provided by flame spray coatings or ferritic steel construction. 

  PT Alkhorayef Petroleum Asia
  One Pacific Place lt 15 SCBD
  Jln Jend Sudirman Kav 52  - 53  Jakarta Selatan
  
  For information , pls contact :
  Ms . Nana 
  Mobile +62 811 9502237
  Email : tpaulinus@alkhorayef.com

  www.alkhorayefpetroleum.com

  
  

  
  

  

  
  

  APC® Switchboard or Fixed Speed Drive (FSD)

  The Alkhorayef Artificial Lift Products & Components (APC) Fixed Speed Drive (FSD) provides operators of Electrical Submersible Pumps (ESP) with complete electrical protection systems for the downhole ESP equipment.

  For added safety, the APC FSD is separated into three compartments; its modular design incorporates a combination of a fused main disconnect switch with a vacuum contactor that connects the ESP system to the surface power supply. This ensures maximum protection for the ESP system in case of major surface or downhole electrical system faults. Built-in lightning arresters protect the downhole pump system from spikes in the power supply, due to lightning strikes.

  In order to provide better protection for the field operators, the APC Motor Controller is located in a low-voltage compartment which is isolated/separated from the high- voltage compartment. No-Load isolation (disconnect) switch with mechanical and electrical interlocks is used on all FSD models.

  The FSD package is also a platform for gathering data, remote monitoring, and controlling ESP operations when the APC controller’s communication option is activated. Optional hardware and software, for remote monitoring and control with SCADA, are now also housed together in the FSD’s enclosure, keeping it simple and compact.

  

  
  

  
  PT Alkhorayef Petroleum Asia
  One Pacific Place lt 15 SCBD
  Jln Jend Sudirman Kav 52  - 53  Jakarta Selatan
  
  For information , pls contact :
  Ms . Nana 
  Mobile +62 811 9502237
  Email : tpaulinus@alkhorayef.com

  www.alkhorayefpetroleum.com